UNI POWER FLUSH

305-1GrapheStudio

Description

Product code: 305

UNI POWER FLUSH works quickly to remove scum, ink slime and paper debris from dampening feed lines
and circulators.


UNI POWER FLUSH should be used as a part of your preventative maintenance program to prevent build-up
of slime, residue and other contaminants in your water system.

Advantages

• Quickly and completely removes scum, ink and paper debris.

• Prevents build up of slime and residue in the lines and pumps.

• Regular use will help avoid costly downtime.

Directions

FOR ROLLERS :
• Please refer to instruction below.
FOR BLANKETS :
• Please refer to instruction below.

 

1. Turn off your cooling system. If you are not able to do this, bring temperature
setting up to maximum (25°C).
2. Drain the entire press dampening system.
3. Remove filters.
4. Fill with fresh hot water and dilute 1 part UNI POWER FLUSH in 20 parts of
hot water and recirculate for 15 to 30 minutes.
5. For tough jobs dilute 1 part UNI POWER FLUSH in 10 parts of hot water and
recirculate for 30 to 60 minutes.
6. Be sure the solution reaches all parts of the dampening system.
7. Flush recirculating system thoroughly with water until water is clear.
8. Drain the entire press dampening system. Once system is empty, put new
filters on.
9. Turn the cooling system back on or bring the temperature setting back down
to 15°C.
10. Fill up with your Unigraph chemistry at the proper dosage. Recirculate for 5
to 10 minutes, drain and fill up again. Your are now ready to print.

 

Information request

All fields identified by an asterisk (*) are mandatory.