Description

Product code: 114

UNI DME wash contains no water but has the chemical property of coupling with water to form a solvent/water emulsion. In a single wash-up, UNI DME wash removes the solvent-soluble contaminants on rollers and blankets, while the water emulsion removes the water-soluble glaze caused by gum, etch, lint and spray powders. By adding 25% to 50% water to a water-miscible wash, you reduce product cost, raise flash point, lessen the emission of solvent vapor into the pressroom, offer better protection to your hands, reduce product odor, and minimize V.O.C.'s.

SPECIFICATIONS
  • Flash Point: 43°C (109°F)

Advantages

  • Mix with up to 50% water for economy
  • Gives faster wash-ups with no residues
  • Removes glaze and piling quickly
  • Deep cleans blankets and rollers

Directions

BLANKETS:
Must be used on a wet wash-up rag. Add UNI DME full strength to rag or mix with up to 50% water in a wash-up bottle to remove both water-soluble and solvent-soluble glaze as well as blanket piling and lint at the same time.

ROLLERS:
Apply UNI DME full strength or mixed with up to 50% water to remove wet ink, gum glaze, paper fibers and lint. Use with UNI O.D. DEGLAZER as part of a press maintenance system.

Information request

All fields identified by an asterisk (*) are mandatory.